Before We Tell You all cool ways to Fix the Problem We wanna stress the fact that Without knowing the Exact Problem one Can’t Fix the Problem So here is few possible reasons That Could Slow down your internet connection.

  • Old Or Outdated Router With Older Firmware
  • Internet Modem Compatibility Or damaged Cable Connectivity
  • Overheating Or Non-Proper Router Placement
  • Granted Speed From I.S.P(Internet Service Provider) Or Unwanted Device Connection
  • Wrong Router Installation Or Incorrect channel Settings
  • Thick Walls Or Wireless Conflict Or Overlap (Other Wireless Frequencies Devices )
  • PC Optimization


Let’s Start With Basic Troubleshooting of your Slow Internet Connection –

Basic Troubleshooting Slow Belkin Router Speed

  1. Turn Off Your Modem & Belkin Router for 2-5 Minutes Let is Cool Down for While.
  2. In the Mean Time Contact Your Internet Service Provider & Ask them About your Internet Service Package (Make Sure Problem Is Not From Their Side)
  3. Turn Your Modem & Router On & Let the Lights Come On.
  4. Login to Your Belkin Router Using Default Gateway 192.168.2.1 & Check for Any Latest Firmware Update.
  • Try these combinations for Username and Password- Username – Admin, Password = Admin Or Username – Admin & Password = password.
  • if You Find Any Just Download & Install them. After Updating Firmware Perform a Power Cycle ( Reboot) to Your Devices.
  • Under the Belkin Console, you Can See How many devices are Using your Internet & If You Think an Unwanted neighbor Or Somone Unauthorized Person is feeding on your Internet Your Better Block their devices from Router So they Can’t Connect With You Again.
  1. Keep Router Somewhere in the Middle of Your place Where It Can Cover Most of The Area. Belkin Recommends Using a Range Extender in case you have thick Walls Or Bigger Area to Cover.
  2. Change Your Login Password to Your Admin Console As well as your Wireless Password. Share it With Only People You Trust at Your Home and Ask them Not to share With Someone.
  3. Adjust The Channel Settings to the Recommended 1, 6 Or Channel 11 Because they Don’t Overlap.

Reset Wireless Router


On the off chance that You See No Improvements After Trying All Steps Given Above, you should Reset Your Belkin Router.


  • Utilize a Tiny Paper clasp Or Object to Press and Hold the Reset key for 20 Seconds While it's Powered On.
  • Reboot the Belkin router and Perform Belkin Router Setup utilizing your Computer.
  • While Installing ensure you Keep every one of the tips given above in Mind So You Don't Make the Same Mistake Again.


‍